THAT 2150-series Blackmer^® Voltage-Controlled Amplifier ICs

IMPORTANT:
The 2150 Series is DISCONTINUED
for easy, pin-compatible replacements, see our 2180 Series or 2181 Series

In order to consolidate our manufacturing for optimum efficiency, we have discontinued all 2150-series Blackmer Voltage Controlled Amplifier ICs. This includes the 2151, 2150A and 2155. Since 1995 we've offered the pin-compatible 218x series VCAs as a better, more advanced alternative to the 215x series. And, if you've been designing with our VCAs, you should already be aware that for the past few years, we've recommended the 218x series for all new designs. Our 218x series offers greater performance at a comparable cost.

Existing customers for the 2150 series should contact us for last time buy and delivery cutoff dates. 

Substituting THAT 218x series VCAs for 2150 series VCAs in Existing Designs

All 2181Lx VCAs are pin-compatible with all 215x ICs, requiring only that you delete one resistor and change the value of one other. No circuit board (PCB) changes are required to support a 2181Lx VCA in place of a 215x-series part. One minor potential inconvenience is that the 2181Lx package is a little taller than the 215x; however, we do not anticipate a problem in practical application. 

To simplify things, below we have provided a chart of recommended conversions between 215x parts and 2181Lx parts. Of course, you may wish to consider the full range of available 218x ICs at this time, but the chart below shows the default choices.

Moreover, we offer a variation of the 218x series -- the 2180Lx ICs, which are pre-trimmed for low distortion during wafer processing. In many applications, by switching to one of these ICs you can eliminate a trim pot and two resistors from your current designs, along with the time and labor required to adjust the trim. The 2180Lx ICs are a little more expensive than their 2181Lx counterparts, but the savings in trim components and time more than offsets the additional cost.

For complete specifications on THAT VCAs download the product datasheets:

2181series datasheet        2180 series datasheet        2150 series datasheet 

For some specific advice on converting from the 215x-series to one of the 218x-series VCAs, read our Design Note 137, "Substituting THAT2180- and 2181-Series VCAs for THAT2150-Series VCAs in Existing Designs" .

For detailed specifications and assistance on the entire 2180- and 2181-series, please contact Applications Engineering, via phone +1.508.478.9200 x108 or via email at apps_support@thatcorp.com. 

For sales questions, or for samples of any of our 218x series, please contact Sales Administration via phone at +1.508.634.9922 or via email at sales@thatcorp.com.