THAT 1606/1646 Balanced Line Driver ICs				STATUS Active RoHS Compatible
THAT 1606/1646 Balanced Line Driver ICs
Key Specifications	Packaging/Pricing/ Samples	Design Notes	Related Products	Additional Resources
Features / Applications / Description

FEATURES

• High-current differential output driver

• Balanced, transformer-like floating output

• +6.0dB gain, balanced or single-ended termination

• OutSmarts technology tames clipping
into single-ended loads

• Stable driving long cables and capacitive loads

• High output: +28dBu into 600 Ω

• Low noise: -101 dBu

• Low distortion: 0.0007% @ 1kHz

• Industry-standard pinout (1646)

• Differential input (1606)

Datasheet Download
1606/1646 Datasheet (275 kB)
OutSmarts® Balanced Line Driver ICs

DESCRIPTION

The THAT 1606 and 1646 are a new generation of monolithic differential line drivers offering improved performance over conventional cross-coupled designs. Based on a high-performance, fully differential op amp and laser-trimmed thin-film resistors, both families exhibit low noise and distortion, high slew rate, and wide output swing. The parts are stable when driving difficult loads, and have short-circuit protected outputs. Both models incorporate THAT's patented OutSmarts technology. Outsmarts is a dual feedback-loop design that prevents the excessive ground currents typical of cross-coupled output stages (CCOS) when clipping into single-ended loads.

The 1646 is pin-compatible with the TI DRV134 and DRV135, as well as the Analog Devices SSM2142.

The unique 1606 offers differential inputs, a space-saving connection to minimize output dc offset, and comes in a special 16-pin QSOP which improves power dissipation without sacrificing footprint.

APPLICATIONS

• Differential Line Drivers

• A/D converter Drivers

• Audio Mixing Consoles

• Distribution Amplifiers

• Hi-Fi Equipment

• Telecommunications Systems

• Instrumentation

Key Specifications (see 1606/1646 datasheet for complete specifications)

Parameter	Conditions	1646 Typical	1606 Typical	Units
Maximum Output Level	—	28	28	dBu
Output Noise	—	-101	-101	dBu
THD+N (Balanced)	20 Hz - 5 kHz 20 kHz	0.0007 0.002	0.0007 0.002	%
THD+N (Single-ended)	20 Hz - 5 kHz 20 kHz	0.001 0.006	0.001 0.003	%
Gain (G1)	100 kΩ	6.00	6.00	dB
Gain Error	—	0.02	0.02	dB
Output Impedance	—	50	50	Ω
Output Common-Mode Rejection Ratio	—	65	65	dB
Slew Rate	—	15	15	V/µs
Short-circuit Output Current	—	70	70	mA
Power Supply Voltage	—	± 4 ~ ± 18	± 4 ~ ± 18	V
Power Supply Current	—	4.9	4.9	mA

Packaging / Pricing / Samples

Model	Package	Order Number	Pricing (1000)	Min Order Quantity	Reference
1606	16 pin QSOP	1606Q16-U	$2.36	98	Request Samples
1606	16 pin QSOP Tape & Reel	1606Q16-UR	Contact us	2000
1646	8 pin DIP	1646P08-U	$2.25	50
	8 pin SOIC	1646S08-U	$2.25	98
	8 pin SOIC Tape & Reel	1646S08-UR	Contact us	2000
	16 pin SOIC Wide	1646W16-U	$2.31	47
	16 pin SOIC Wide Tape & Reel	1646W16-UR	Contact us	1000
1606/1646 Demo	—	1606/1646DEMO	$100	1
All 1606/1646 parts are RoHS compliant. Minimum order quantity (MOQ) is one tube or one reel. Parts must be ordered in multiples of the MOQ. Samples are available to qualified applicants. Pricing is subject to change.

Design Notes (as PDF files)

Analog Secrets Your Mother Never Told You (1528k)
Originally presented at the 123rd AES Convention, this seminar provides tips and techniques to achieve optimal performance in the analog signal path. Topics covered range from inputs (balanced line and mic level) to outputs (balanced to single-ended), and include analog signal processing (VCAs, RMS detection, and Analog Engines).

Related Products

Balanced Line Receivers
THAT 1200 Series	Single Channel Balanced Line Receivers	1200 Series Datasheet
THAT 1240 Series	Single Channel Balanced Line Receivers	1240 Series Datasheet
THAT 1250 Series	Low-Cost Single Channel Balanced Line Receivers	1250 Series Datasheet
THAT 1280 Series	Dual Channel Balanced Line Receivers	1280 Series Datasheet
THAT 1290 Series	Low-Cost Dual Channel Balanced Line Receivers	1290 Series Datasheet
Audio Preamplifiers
THAT 1510/1512	Low Noise High Performance Audio Preamplifier	1510/1512 Datasheet

Additional Resources

1606/1646 Demo Board - The THAT 1606/1646 Demonstration System (US$100) allows an engineer to test the performance of a THAT 1606 or 1646 IC quickly and easily. The 1606/1646 Demo Board is self-contained circuit board with XLR connectors for signal input and output and a 3-pin header for connection to an external regulated DC power supply (not included). See the 1606/1646 DEMO Datasheet for more information.

1606 Surface Mount Adapter Board - For our integrated circuits which are only available in surface mount packages THAT Corporation offers adapter boards which allow one of these surface-mount ICs to interface to a circuit board via traditional thru-hole mounting. These adapters make it easy for a design engineer to evaluate our surface-mount products on a prototype board without having to employ SMT technology. Adapter boards are available to qualified applicants.

Line Driver Comparison Chart - The 1646 is pin-compatible with the TI DRV134 and DRV135, as well as the Analog Devices SSM2142. Both the 1646 and 1606 offer superior performance. See here a chart of the features and specifications of our OutSmarts line drivers to competing, and in some cases pin-compatible, components.

Line Driver Clipping Behavior - THAT 1646 and 1606 Line Drivers use a dual feedback-loop design that prevents the excessive ground currents typical of cross-coupled output stages (CCOS) when clipping into single-ended loads. In these clipping performance graphs you can see the superior clipping behavior of OutSmarts technology versus our competitor's line drivers.

Part Number Cross Reference - A chart of THAT part numbers cross-referenced to other IC manufacturers.

Harsh Environment Packaging - TT Semiconductor repackages THAT Corporation’s IC products in ruggidized plastic for the medical, aerospace, defense, and heavy industrial marketplaces.

1606/1646 Material Data Declaration Sheet
Material Data Declaration Sheets (MDDS) disclose the hazardous materials in our integrated circuits as required by the European RoHS directive.

THAT 1606/1646 Balanced Line Driver ICs

The 1646 is pin-compatible with the TI DRV134 and DRV135, as well as the Analog Devices SSM2142.

THAT 1606/1646
Balanced Line Driver ICs