THAT Corporation 1583-5173 Digital Microphone Preamplifier Chip Set

THAT 1583/5173 Digitally Controlled Microphone Preamplifier				STATUS Active RoHS Compatible
THAT 1583/5173 Digitally Controlled Microphone Preamplifier
Key Specifications	Packaging/Pricing/ Samples	Design Notes	Related Products	Additional Resources
Features / Applications / Description

FEATURES
• Versatile two-chip solution:
- 1583 Programmable analog gain block
- 5173 Digital gain controller

• Accommodates full pro audio levels
  +26.4 dBu max input with ±17V supplies

• Programmable gain: 0 to 60 dB in 3 dB steps

• Low Noise: -125 dBu EIN, 60 dB gain, Rs=150 Ω

• Low THD+N: < 0.0006% @ 21 dB gain

• Integrated servo minimizes output offset

• Integrated zero crossing detector minimizes switching noise

• Daisy Chainable SPI control interface

• Four general purpose outputs (GPOs)

• Small footprint:
   4 x 4 mm QFN16 (1583)
   5 x 5 mm QFN24 (5173)

Datasheet Download

5173 Datasheet (350 kB)
Digital Mic Preamp Controller

1583 Datasheet (186 kB)
Differential Audio Preamplifier

THAT 1570/5173 Digital Microphone Preamp Circuit

DESCRIPTION

The THAT1583 and THAT5173 ICs enable digitally controlled microphone preamplifier applications with unprecedented performance. Operating on maximum ±17V supplies, the chipset accepts pro audio input levels (+26.4dBu max) without an input pad. Gain is adjustable from 0dB to 60dB in 3dB increments. The 5173’s built-in zero-crossing detector and other patent-pending techniques for reducing zipper noise enable very smooth and silent gain changes. A differential servo reduces output offsets to less than 1.75 mV.

Four general purpose outputs on the 5173 can be connected to a variety of peripheral functions, e.g. input pad, phantom power switches, signal routing switches, LED indicators, etc. Separating the analog mic pre front end (THAT1583) from the digital functions and switched resistor ladder (THAT5173) allows each IC to be optimized for high performance.

Key Specifications (see the 5173 and 1583 datasheets for complete specifications)

Parameter	Conditions	1583/5173 Combination	Units
Supply Voltage		± 17	V
Supply Current	No Signal	7.0 (1583) 7.6 (5173) 15.3 (Total)	mA
Power	@ +/- 5V	146	mW
THD + N	21 dB gain	0.0006	%
Equivalent Input Noise, Rs = 150 Ω	0 dB gain 30 dB gain 60 dB gain	-100 -118 -125	dBu
Max Differential Input	0 dB gain 30 dB gain 60 dB gain	26.4 -3 -33	dBu
Gain Range		0 - 60	dB
Step Size		3	dB
Max Gain Error		Typ: 0.2 Max: 0.5	dB

Packaging / Pricing / Samples

Model	Package	Order Number	Pricing (1000)	Min Order Quantity	Reference
1583	16 pin QFN	1583N16-U	$5.17*	92	Request Samples
1583	16 pin QFN Tape & Reel**	1583N16-UR		2000
5173	24 pin QFN	5173N24-U		46
5173	24 pin QFN Tape & Reel**	5173N24-UR		2000
1583/5173 Demo Board	—	1583/5173DEMO	$250.00	1
All 1583 and 5173 parts are RoHS compliant. Minimum order quantity (MOQ) is one tube or one reel. Parts must be ordered in multiples of the MOQ. Samples are available to qualified applicants. Pricing is subject to change. * Price when 1583 and 5173 are purchased as a pair. Pricing varies when purchased separately. **There is a small additional charge for tape and reel packaging.

Design Notes (as PDF files)

Design Note 140 Input and Output Circuits for THAT Preamplifier ICs (244k)

More Analog Secrets Your Mother Never Told You (915k)
At the 127th AES Convention attendees were invited to attend a THAT exhibitor seminar — "More Analog Secrets Your Mother Never Told You". A sequel to our popular first "Analog Secrets" seminar, this new presentation exposes more design secrets including “extreme performance” microphone preamps, protecting audio inputs/outputs during phantom power faults, and maintaining high dynamic range in low cost applications.

Related Products

Differential Audio Preamplifiers
THAT 1570	Low Noise Differential Audio Preamplifier	1570 Datasheet
THAT 1583	Low Noise Differential Audio Preamplifier	1583 Datasheet
Gain Controllers
THAT 5171	Digital Preamplifier Controller	5171 Datasheet
THAT 5173	Digital Preamplifier Controller	5173 Datasheet
Other Digital Microphone Preamps
THAT 1570-5171	Digitally Controlled Microphone Preamplifier Chip Set
THAT 1570/5173	Digitally Controlled Microphone Preamplifier Chip Set
THAT 1583/5171	Digitally Controlled Microphone Preamplifier Chip Set
Single Ended Audio Preampifiers
THAT 1510/1512	Low Noise Single Ended Output Audio Preamplifiers	1510/1512 Datasheet
Balanced Line Receivers
THAT 1200 Series	InGenius® High CMRR Balanced Line Receivers	1200 Series Datasheet
THAT 1240 Series	Single Channel Balanced Line Receivers	1240 Series Datasheet
THAT 1250 Series	Low-Cost Single Channel Balanced Line Receivers	1250 Series Datasheet
THAT 1280 Series	Dual Channel Balanced Line Receivers	1280 Series Datasheet
THAT 1290 Series	Low-Cost Dual Channel Balanced Line Receivers	1290 Series Datasheet
Balanced Line Drivers
THAT 1606/1646	OutSmarts® Balanced Line Driver	1606/1646 Datasheet

Additional Resources

Digitally Controlled Microphone Preamplifier Selector
A side by side comparison of the features and specifications of our digitally controlled microphone preamplifier chip sets.

1583/5173 Digitally-Controlled Mic Preamp Demo Boards - A THAT Digitally-Controlled Mic Preamp Demo Board (US$250) allows developers to evaluate the performance of the THAT1583 / THAT5173 chipset. The demo board provides a balanced audio input on a Neutrik "combo" connector with 48V phantom power, and a balanced audio output on XLR and ¼" TRS connectors. The supplied graphical user interface (GUI) controls all functions in the 5173 chip via USB. A prototyping area is available for adding or modifying circuitry. See the 5173 DEMO Datasheet for more information.

1583 and 5173 Surface Mount Adapter Boards - For our integrated circuits which are only available in surface mount packages THAT Corporation offers adapter boards which allow one of these surface-mount ICs to interface to a circuit board via traditional thru-hole mounting. These adapters make it easy for a design engineer to evaluate our surface-mount products on a prototype board without having to employ SMT technology. Adapter boards are available to qualified applicants.

1583 Material Data Declaration Sheet
Material Data Declaration Sheets (MDDS) disclose the hazardous materials in our integrated circuits as required by the European RoHS directive.

5173 Material Data Declaration Sheet
Material Data Declaration Sheets (MDDS) disclose the hazardous materials in our integrated circuits as required by the European RoHS directive.

THAT 1583/5173 Digitally Controlled Microphone Preamplifier

THAT 1583/5173
Digitally Controlled Microphone Preamplifier